How ToLinksys Router SetupSetupWireless Router

How To Set Up Cisco Routers Linksys Wireless Router?

Cisco routers are also used to call Linksys routers, which are used by domestic users. So to setup Linksys Cisco Router for the first time? Let’s find out in the section below.

Cisco Linksys Router setup installation is the same as other brands of wireless router installation, as you need to connect one end of Ethernet cable with Linksys wireless router with another end going into the Ethernet port of the computer. Before installing the Cisco router, let’s first understand the following Cisco router interfaces.

Cisco routers usually include a WAN port, multiple LAN ports, reset keys and power interfaces. The newer Cisco routers also feature a USB expansion interface that can be used to connect to an extended USB stick, as shown.

The Cisco router’s WAN port is used to connect to the external network cable, and the LAN port is used to connect to the computer. Below we use a Cisco router installation diagram to let everyone know intuitively.

If it is an ADSL dial-up user with a CAT3 or CAT5, the external network cable is first plugged into the CAT cable, and then the other interface is connected to the Cisco router WAN port by a network cable, and the LAN port is connected to the computer by a network cable. In addition, if it is fiber or cell broadband, there is no CAT device, then the external network cable can be directly inserted into the WAN port of the Cisco router, and the others are the same.

Linksys wireless router settings

1. After installing the Cisco router, turn on the power of each device, turn on the computer, then open the browser in the computer, then enter the default login address of the Cisco router, press Enter to open and then, the Cisco router login screen will pop up.

The new Linksys Wireless Router setup sets the default login username and password to be lowercase admin. After inputting, click “OK” at the bottom to enter the Cisco wireless router settings.

2. After entering the Linksys wireless router setting interface, the first thing to see is the Internet basic setting interface. Here you can directly set the router. In the PPPoE setting interface, enter the online account and password provided by the network provider. Click on the completion. The “Save Settings” at the bottom.

3. After saving the basic settings of the previous step, click “Wireless Settings” on the navigation bar, and then in the wireless Wi-Fi encryption settings, set a Wi-Fi wireless network name to be transferred from the computer. You can keep the default name or enter a custom name and after setting the Wi-Fi name, click “Save Settings” at the bottom.

4. Then click on the top navigation bar wireless settings below the “security settings” here is mainly to set the Wi-Fi wireless password, in order to prevent the surrounding users from smashing the network, the wireless password is most transferred from the computer network is set to be more complicated. In this step setting, it is best to set the security mode to WPA-PSK2. The WPA shared key is also the Wi-Fi wireless password. The default password would be 123 so you will have to enter a strong password, which should be the combination of letters, numerals and special characters. Once you’re done, don’t forget to click “Save Settings” at the bottom.

Linksys Cisco wireless router is set here, basically, it can be, we have completed the Internet settings and wireless settings, go to open the browser to see if it can be reprinted from the computer network high-speed Internet. In addition, nearby wireless devices such as smartphones, tablets, and notebooks can also search for the wireless network set up on us. After clicking the connection, enter the Wi-Fi password on your computer. The wireless device can also access the free high-speed Internet.

That was all about setting up your Linksys Cisco router. If you come across any issue, then you can consult Linksys Router Setup experts and get the best solution for the problem.

Leave a Reply

Your email address will not be published. Required fields are marked *